Making Connections - Tascam CD-GT1 Bedienungsanleitung

Inputs
Connecting a guitar
o connect a guitar or bass guitar to
the unit simply connect one end of the
guitar cord to the guitar and connect
the other to the GUITAR/MIC IN
of the 
f you use eff ects pedals or stomp
boxes you can connect the output of
these to the  remember that
the  has its own eff ects
et the GUITAR/MIC
GUITAR 
ake sure the GUITAR power button
is pushed in
WARNING
NEVER connect a guitar amplifi er to the
GUITAR/MIC
CD-GT1's input, as you will
damage your equipment if you do this.
Connecting a microphone
onnect a suitable microphone ask
your  dealer if you are not
sure to the
the 
et the GUITAR/MIC
jack
Connecting a stereo line source
switch to ou can also connect a stereo line
source such as the outputs from a syn
thesizer a guitar preamplifi er or rack
mount eff ects unit or a cassette deck
etc to the  se the
IN minijack beside the
IN jack
WARNING
You should NEVER connect the speaker out-
puts of a guitar amplifi er to anything except
speakers. If you are in any doubt at all about
what you can connect to your CD-GT1, ask
someone who knows.
GUITAR/MIC IN jack of
switch to MIC 
LINE
GUITAR/MIC

Making connections

Connecting a footswitch
ou can connect a footswitch to the ou can connect a footswitch to the
 to step through the eff ect  to step through the eff ect
slot settings or to cue the  player slot settings or to cue the  player
handsoff  see later in this manual
for details
o avoid problems with your 
 use only a  
footswitch or similar nonlatching
pushtomake footswitch connected
to the FOOT jack
Outputs
onnect the unit to a stereo systems
 input or mixer input etc using
a suitable stereo cable not supplied
connected to the s
OUT stereo minijack
onnect a pair of headphones not
supplied to the PHONES
jack for private listening
TASCAM CD-GT1 —
LINE
stereo mini
7