Using Effects; Storing Your Own Effect Settings In A Bank Slot - Tascam CD-GT1 Bedienungsanleitung

Using effects

How effects work
 ere are two eff ect banks  ere are two eff ect banks
each with fi ve slots numbered from each with fi ve slots numbered from
through where you can store your
1 5
own eff ect settings
Eff ects are created from the  preset
eff ects available  guitar and  vo
cal hen a bank and slot are selected
if a preset eff ect is recalled and edited
that bank slot is automatically fi lled
with the edited eff ect
Storing your own effect settings
in a bank slot
ress the BANK key to select either the
or bank as shown on the display
A B
ress the No. key to select the bank slot
 through  as shown on the display
1 5
ress the LCD MENU key until
appears on the display
12
— TASCAM CD-GT1
and 
A B
se the key to turn the eff ect
5
ress
ENTER
preset eff ect 
and keys
5 b
NOTE
If there were any settings in the selected
bank slot to start with, they will be overwrit-
ten when you recall a library entry.
ress ENTER
ing the parameters with the
keys see the table later for details of
these parameters
 e last parameter is always
output level from the eff ect unit 
  is is only available when the ef
64
fect is active and is bypassed with the
EFFECT
eff ect off 

ON
 and then select the
through  with the
00 42
once more to start edit
and
5 b
LVL the
to
0
et the level and then press the
DISPLAY/ESC key to exit the eff ect
settings  e eff ect settings you have
made are automatically stored in the
bank slot you fi rst chose
Recalling an effect with your
settings
hen you have stored the eff ect set
tings in a bank slot as described above
you can recall them simply pressing
the BANK and No. keys to select the
appropriate bank slot you should also
make sure that the eff ect is switched
on
TIP
If you have a footswitch connected and
the FOOT menu item is set to EFF, you can
step through the bank slots by pressing the
footswitch.