Seite 22
CLR 40 Warning TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE LIGHTNING FLASH WITH EXCLAMATION POINT- ARROWHEADSYMBOL- within an equilateral triangle, is P O I N T- w i t h i n a n e q u i l a te r a l...
Seite 23
Brand name: Blaupunkt Responsible party: M3 Electronic GmbH Gutenbergstrasse 5, D-65830 Kriftel. Germany Hereby, Blaupunkt Competence Center Audio M3 Electronic GmbH, declares that this Class 1 equipment is in compliance with the essential requirement and other relevant provisions of Directive 1999/5/EC.
Seite 24
CLR 40 of air through the ventilation openings. 7. HEAT – The appliance should be situated away from heat sources such as radiators, stoves, or other appliances (including amplifiers) that produce heat. 8. POWER SOURCE – the appliance should be connected to power supply only of the type described in the operating instructions or as marked on the appliance.
Seite 25
CLR 40 18. DON'T remove any fixed cover as this may expose dangerous voltages. 19. DON'T place hot objects or naked flame sources such as lighted candles or nightlight on, or close to equipment. High temperatures can melt plastic and lead to fires.
CLR 40 AC POWER Please check carefully the rated voltage of your appliance matches your local voltage. Plug the AC cord into the standard household electrical socket. BATTERY BACKUP The clock and alarm settings can be protected against AC power failure by 2 “AAA”...
Seite 27
CLR 40 LOCATION OF CONTROL LCD DISPLAY INDICATION...
CLR 40 SETTING TIME AND DATE 1. Press & hold SET button for around 2 seconds until the display flash and entered the year setting. 2. Press SCAN+ or SCAN- until the correct year appears in the display. 3. Press SET to confirm 4.
Seite 29
CLR 40 SETTING DUAL ALARMS FUNCTIONS Notes • Before setting the alarm time, make sure the Clock has been set • Alarm can only be set in Clock mode only • When setting the alarm to wake up by Radio, Radio station & volume level will be the same as the last radio operation.
CLR 40 SLEEP TIMER The sleep function allows to play in blocks of 10, 20, 30, 40, 50, 60 70, 80 or 90 minutes before shutting off automatically. When in the Radio mode, press the SLEEP button repeatedly until the desired preset time appears on the display (90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes).
Seite 31
EU. For more information, please contact the local authority or your retailer where you purchased the product. All rights reserved by Blaupunkt Competence Center Audio M3 Electronic GmbH. This material may be reproduced, copied or distributed for personal use only.