Menu Options; Dmx Values - Chauvet DJ Gobo Zoom Kurzanleitung

Gobo Zoom™ USB QRG

Menu Options

Main Level
2-CH
Gobo
U--
SEr
DMX Linking
Starting Address
Master/Slave
Connection
D-Fi™ USB
Connectivity

DMX Values

2-CH
Channel Function
Programming Levels
d--1–512
StOP
L-SP
r-SP
U 0–U255
On
OFF
The Gobo Zoom™ USB can work with a DMX controller. Instructions for
connecting and configuring this product for DMX operation are in the User
Manual. If you are not familiar with DMX or DIP-switch configuration,
download the DMX Primer from www.chauvetlighting.com.
To ensure full access to the two channels available in DMX mode, the
highest recommended DMX address is 511.
The Gobo Zoom™ USB uses the DMX data connection for its
Master/Slave mode. Instructions for connecting and configuring this
product for Master/Slave operation are in the User Manual.
The Gobo Zoom™ USB is able to become a D-Fi™ wireless
receiver/transmitter with the use of the D-Fi™ USB from CHAUVET® DJ.
Simply set the DIP switch D-Fi™ receiving/transmitting channel, plug it
into the USB port then set the product's DMX Personality and DMX
Address. Further instructions for connecting and configuring this product
for D-Fi™ USB operation are in the User Manual.
WARNING! DO NOT plug anything other than a D-Fi™ USB into the
USB port. Doing so may cause damage to the product.
Once plugged in, the D-Fi™ USB will take over the product. Wired
DMX, manual display control/menu buttons and IRC-6 will be
unavailable until you unplug the D-Fi™ USB. The priority levels are:
1. D-Fi™ USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display / Menu Buttons
1 Dimmer
2 Gobo Rotation
2-channel DMX mode
No rotation
L 0–L255 Left rotation speed
r 0–r255 Right rotation speed
Dimmer
Turns on IR control
Turns off IR control
Value Percent/Setting
000 ó 255 0–100%
000 ó 000 Stop
001 ó 122 Left rotation (fast to slow)
123 ó 133 Stop
134 ó 255 Right rotation (slow to fast)
5
Description
EN