Introduction; Features - Sony VID-P110 Bedienungsanleitung

Introduction

The VID-P110 Video Presentation Stand allows you to
display visual materials such as paper-based
documents, transparent sheets, slides, film negatives,
and solid objects on a color monitor or projector by
shooting them with a color video camera.

Features

The VID-P110 has the following features.
Easy to connect
Visuals can be displayed by simply connecting a color
monitor because the camera, lens, light, and power
supply are all incorporated in one unit.
Sharp screen
The 380,000 (for the NTSC model) or 440,000 (for the
PAL model) pixels of the
allow 460 (for the NTSC model) or 450 (for the PAL
model) horizontal resolution TV lines producing high
screen resolution. An S VIDEO OUT connector allows
you to connect a monitor or projector equipped with an
S VIDEO IN connector, thus giving you even higher
screen resolution.
Easy to adjust
The arm lights turn on and the focus, iris and white
balance adjust automatically after power-on. You can
also adjust each setting manually depending on the
picture you want to display.
Quick response auto focus
When the inner focus lens is used, it can correctly
adjust focus position in only 1 or 2 seconds.
12 × power zoom lens
The 12 × power zoom lens allows you to display
various materials ranging in size from a
" × " (29 × 22 mm) to a 12
1 3 / 7 /
16 8
240 mm) sheet on the screen.
4
1
/ -inch CCD pickup device
3
" × 9 " (325 ×
7 / 1 /
8 2
Pattern memory
Two pattern settings can be set. The pattern memory
function memorizes the zoom, focus, iris, white
balance, lighting and effect (black & white, negative)
settings. To recall the pattern memory, press the
button you preset.
Tilting and panning mechanism
By tilting the camera upwards through 90 degrees and
moving it from left to right, you can pan and/or tilt the
camera to shoot material pasted on the wall or even
yourself.
Easily removable close-up lens
After tilting up the camera, you can easily remove the
close-up lens by revolving it.
Various materials can be shot and
displayed
Various materials from paper-based documents and
transparent sheets to slides, film negatives and solid
objects can be shot and displayed.
To shoot and display film negatives, just press the
appropriate button to change the lighting to the back
light and setting for displaying film negatives.
Built-in back light
The large-sized built-in back light allows the A4-sized
object such as transparent sheets, slides or film
negatives to be shot and displayed on a monitor. To
use the back light, just press a button.
Built-in video selector
A video selector is incorporated in this unit. It allows
you to switch the pictures shot with this unit to those
from the connected video equipment such as a VCR
and laserdisc player and vice versa.