Mounting Accessories - Ferm RSM1017 Übersetzung Der Orginalbetriebsanleitung

EN
Wear a dust mask. Working with wood,
metals and other materials may produce
dust that is harmful to health. Do not work
with material containing asbestos!
The number of revolution of the machine
can be electronically set.
Safety instructions
The machine must not be damp and must not be
operated in a wet environment. Wear protective
gloves and sturdy footwear.
Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord.
Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
Do not saw materials containing
asbestos!!!
• Wear protective goggles when working with
materials which produce large amounts of
chips.
• Wear a protective mask when sawing other
fibrous materials.
• Remove adjusting keys and wrenches before
turning the tool on.
• Secure your workpiece with clamps.
• Move machine towards the workpiece only
when switched on.
• Always hold machine with both hands and
ensure that you have a safe footing while
working.
• The machine may be operated only with the
foot plate mounted. When sawing, the foot
plate must always rest on the workpiece.
• Incorrect handling may damage the machine.
Therefore always comply with the following
instructions.
• Use only sharp saw blades in perfect
condition; replace cracked, distorted or blunt
saw blades immediately.
• Machine should only be switched on with
blade installed
• Select tools, stroke rate and pendulum
actions according to material, Take care to
maintain a constant reed rate.
4
• Do not attempt to stop the saw blade with
lateral pressure after switching off.
• Only use genuine accessories.

3. Mounting accessories

Fitting a saw blade
Fig. B
The machine is equipped with a quick fit system.
• Turn the clamping ring (2) of the saw blade
holder as far to the left as possible and hold it
there.
• Place the saw blade in the blade holder.
• Let go of the clamping ring.
• Make sure when changing the saw blade that
the blade holder is free of material debris
(such as splinters of wood or metal).
• Before use, always check that the saw blade
is securely fixed.
Removing the saw blade
• Turn the clamping ring of the saw blade holder
as far to the left as possible and hold it there.
• Remove the saw blade from its holder.
• Let go of the clamping ring.
Adjustment of the guide shoe
Fig. A
When the blade loses its sharpness at some
sections of it's cutting edge, reposition the foot
plate to use a sharp, unused portion of its cutting
edge. Besides this, the foot plate can also be used
for adjusting maximum saw depth, especially
useful when sawing in hollow walls.
• The footplate can be extended by loosening
the two footplate mounting screws (5) using
the 4 mm hexagon key and then pulling the
footplate out to the required length.
Ensure the footplate adjustment screws are
secure before resuming work.
4. Operation
Always follow the safety notes and the
relevant safety code.
Make sure that the saw blade does not
rest on or touch any objects when the
machine is switched on.