Infrastructure Mode - Hama 00062765 Bedienungsanleitung

3.1.1Operation in infrastructure mode
First enter a profile name, e.g. "My_profile". In the client name field, the name of your PC is entered
automatically.
If you have selected version 1, you must now enter the SSID of the target network in the SSID1 field. This is
in the wireless LAN settings in your router or access point or you can ask the person in charge. If you have
selected version 2, the SSID has already been copied automatically from the scanned list.
Switch to the Advanced tab.
Transfer power level:
You can reduce the power level. This may be practical if your WLAN devices are quite close to one another.
Wireless mode:
2.4 Ghz 54 Mbit/s:
2.4 Ghz 11 Mbit/s:
Super G ™ :
eXtended Range (XR) ™: Recommended if the router/access point or other devices in the network
QoS:
Power saving mode:
Off: Fastest mode, ideal for computers which are connected to the mains.
Maximum: For optimal battery life for notebooks
Normal: Increased battery life; faster than "maximum mode
802.11b preamble:
We recommend that you leave this set to Short & long.
Wireless mode when starting the ad-hoc network:
This setting is not important for the infrastructure mode
802.11 authentication mode
If you use WEP encryption, you can select either auto, open or installed.
Activate this option to support 802.11g standard devices at 54 Mbps (recommended)
Activate this option to guarantee compatibility to 11 Mbps devices (recommended)
Recommended if the router/access point or other devices in the network
support this mode.
support this mode.
Support for bandwidth reservation (seldom required)
In general all values here can be left at the default settings.
The individual items are described briefly below.
Network type:
Select Infrastructure. This mode facilitates connection to a
wireless LAN router or access point.
21