Hama 00062765 Bedienungsanleitung Seite 19

Click the Change button to edit a selected profile from the list. The Remove button allows you to delete a
profile which is no longer required from the list. To activate a profile from the list, first select it and then click
the Activate button.
Click the Scan button to search for available wireless networks.
All wireless networks available in your reception range are shown with the following information:
- Super G ™ is a method of increasing the maximum data rate to 108 Mbps by using two channels with
54 Mbps each.
- eXtended Range (XR) ™ is a special technology to increase the range via the fallback of the standard
data rate which can be expanded to up to 0.25 Mbps.
Click the Update button to refresh the view. Click OK to close the window again.
Click the Activate button after you have selected an available network from the list. You can record it in a
new profile If you do so, the dialogue box for creating a new profile opens. For more information on this, see
Creating a new profile.
Select the required profile in the list of the Available
profiles. Click Add. The profile select is then displayed in
the list of Automatically selected profiles. That means that
this profile is run automatically, e.g. after a restart. If there
is more than one profile in this list, you can set the required
sequence with the Move up and Move down buttons. The
Remove button allows you to delete a profile from the list.
Click OK to complete the configuration.
• SSID network name/network ID
• If wireless encryption is used, this is indicated by a key
symbol.
• Use of Super G ™
• Use of eXtended Range (XR) ™
• Signal strength
• WLAN channel (in Europe, channels 1-13 are available)
• Wireless mode, either 108Mbps, 54Mbps or 11Mbps
19