Herunterladen Inhalt Inhalt Diese Seite drucken

Quick Configuration - Hama 00062765 Bedienungsanleitung

Wireless lan usb stick 108 mbps
Vorschau ausblenden Andere Handbücher für 00062765:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

For Windows® /XP only
The following information confirms the selection of the configuration assistant. The software provided
with the stick or the Windows ® software can be used. We advise you to use the software provided with
the stick. Click Next and select WLAN 802.11g USB 2.0 adapter assistant and click Next to confirm.
A message appears informing you that the driver is being installed automatically:
The message that the software has not passed the Windows® logo test may appear while the driver is being
installed:
After installation, "InstallShield Wizard complete" is displayed. Now remove the CD-ROM from the drive and
restart the computer by selecting „Yes, restart computer now" and clicking Finish.
After the restart, you can configure the WLAN adapter.
2.
Quick configuration
If you are already somewhat familiar with the configuration of wireless LAN devices, this quick guide should
be enough to prepare the device. If you have no experience with wireless LAN devices, please read the
comprehensive instructions from page 18.
1.
Open the wireless LAN configuration utility by clicking the WLAN 802.11g client assistant link on the
Desktop or under Start/Programs/WLAN 802.11g USB Adapter/WLAN 802.11g client assistant.
2.
Change to the Profile management tab and click Scan!
3.
Select the required network in the list and click Activate!
4.
Name the profile in the next window. Switch to the Security tab.
5.
Select the encryption mode used in the target network and then click Configure. If no encryption is used
in the target network, switch to the Advanced tab and ignore item 6.
This only means that the test has not been performed. The sta-
bility and function of the driver was tested thoroughly before
delivery. The qualification of the drivers by Hama means that
new versions can be used far earlier and do not have to wait
for the Windows® logo test. Click Continue installation to
confirm the message.
Click OK to confirm straight away as
you have already connected the stick.
17

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis