Philips FC9308 Bedienungsanleitung Seite 9

attaching the ComfortControl handgrip
1 Attach the handgrip to the telescopic tube ('click').
2 To disconnect the handgrip from the tube, hold the handgrip with
one hand. With the other hand, hold the telescopic tube and press
the tube release button (1) and pull the tube off the handgrip (2).
Note: This vacuum cleaner has been fitted with holes at the end of the
handgrip. These holes may prevent objects from getting stuck or damaged
when you use your vacuum cleaner without the tube or accessories supplied.
attaching the nozzle and accessories
1 To connect the nozzle or an accessory to the tube, press the spring-
loaded lock button (1) on the tube and insert the tube into the floor
nozzle (2). Fit the spring-loaded lock button into the opening in the
nozzle ('click').
Note: You can also connect the nozzle or accessories directly to the handgrip in
the same way.
2 To disconnect the nozzle or an accessory from the tube, press the
spring-loaded lock button and pull the nozzle out of the tube.
hose
1 To connect the hose, push it firmly into the appliance ('click').
Note: Make sure that the projection of the hose fits into the recesses.
English
9