Usb Operation - Changchong LED32E4500T2 Bedienungsanleitung

Menu Operation
• First, insert a USB memory device into the USB port.
• Press the SOURCE button to call up the signal source selection menu. Use the ▲/▼
to highlight USB, and the press ENTER button to access the USB mode. (Alternatively,
Press the DMP button on the remote control to enter the USB mode)
• You may also use the signal source selection menu to exit from the USB mode.
NOTE:
 Special USB device may be not or well supported.
 USB max. Load: DC5V 500mA.
• The formats supported
Media File Ext.
.mpeg, .mpg MPEG1/2,MPEG4,VC1
.vob, .dat
.ts, .tp, .trp
.avi
.mp4，.mov
Movie
.mkv
.flv
.asf

USB Operation

Codec
Video
MPEG1/2
MPEG1/2,H.264,MVC,
VC1,HEVC
MPEG1/2,MPEG4,
H.263, H.264, VC1,
XviD
MPEG1/2,MPEG4,
D,H.263,H.264
HEVC
MPEG1/2,MPEG4,
H.263,H.264,
VC1,
HEVC,
H.264,VC1
MPEG1/2,MPEG4,
H.264,VC1,
Audio
MPEG1/2
Layer1,MPEG1/2
Layer2,MPEG1/2
Layer3,AAC,AC3,
EAC3,HEAAC
MPEG1/2
Layer1,MPEG1/2
Layer2,MPEG1/2
Layer3,WMA,AAC,AC3
,HEAAC
MPEG1/2
Layer3,AAC,AC3,
EAC3,HEAAC
MPEG1/2
Layer1,MPEG1/2
Layer2,MPEG1/2
Layer3,AAC,WMA,
AC3,HEAAC
MPEG1/2
Layer3,AAC,HEAAC
MPEG1/2
Layer1,MPEG1/2
Layer2,MPEG1/2
Layer3,WMA
22
Remark
1.Max resolution 1080P 30fps
2.MPEG-4 V2 not support