Channel Menu - Changchong LED32E4500T2 Bedienungsanleitung

Menu Operation
■ Antenna Type: Press the ▲/▼ buttons to select the antenna type.
※ When TV signals is Air.
■ Auto tuning: Select the ENTER button to start Auto Tuning.
1. Select the country and tune type for channels.
2. The TV will begin memorizing all of the available channels.
Once the progress bar is full, the found channels will be stored and the unit will
proceed to the search for TV, DTV and Radio.
If you press the MENU button in TV searching, the Channel Tuning will skip to DTV
searching as the suggestive picture shows.
■ DTV Manual Tuning: Press the ENTER button.
Press the ◄/►button to select channel, then press the ENTER button to search.
When a channel is found, the searching process will stop, the channel will be saved
with current channel number.
If the program is not your expected one, please press the ◄/►button to continue
the searching. Press the EXIT button to exit.
※ When TV signals is Cable.
■ Auto Tuning: Select the ENTER button to start Auto Tuning.
1. Select the county and tune type for channels.
2. Adjust the Cable Scan Menu.
–Scan Type: Scans for all active broadcast station channels and stores them in
the TV.

Channel Menu

CHANNEL
Antenna Type
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
LCN Enable
Dynamic Rescan
Programme Edit
CI Information
Move Select
CHANNEL
Antenna Type
Auto Tuning
CADTV Manual Tuning
ATV Manual Tuning
LCN Enable
Dynamic Rescan
Programme Edit
CI Information
Move Select
15
1 / 2
Air
On
On
Return
1 / 2
Cable
On
On
Return