Werbung
Set up instructions CLIMA
Thank you for having chosen a Brunner quality tent.
This product has been developed and manufactured in order to give you long term satisfaction. All pitching accessories are supplied. In case you need
special additional parts please contact your specialist outdoor retailer.
Have fun!
Pitching preparations:
Connect the segments of the tent poles and sort them into groups according to their lenght.
Close zippers of all entrances and windows.
Carefully choose the final location of the tent.
STEP 1
Spread the flysheet on a flat, clean and sufficiently large area
Insert the flexible tent poles into the respective pole sleeves. Star this operation from the main cabin and proceed towards
the front area.
Place the pole ends into the black connectors.
STEP 2
Now place the vertical metal poles again starting from the main cabin and proceeding towards the front area.
The metal poles must be inserted into the opposite side of the plastic connectors (upper side) and into the metal pins fixed to
rings and rubber braids (lower side). At the end of this mounting stage the tent will be erected.
Apply the guying ropes to the front part of the tent and anchor the verandah with pegs.
Fix the flysheet with pegs - it should be under gentle tension - do not exceed.
STEP 3
Open the zippers of entrances and windows and fix the inner tent to the ringslocated inside the flysheet.
Secure the inner tent anchoring the cornes to the ground using tent pegs.
The inner tent divider can now be fixed.
Attach all guying ropes to the respective anchor points and tighten. Do not exceed with tension.
STEP 4
Apply the roof cover and fix it to the metal ples
Spread the tent carpet in the front area and fix it with pegs.
Attention: Do always clean and dry the tent before storage. Remember to close zippers of entrances and doors.
Werbung
