Toasting Frozen Bread - Philips HD2686 Bedienungsanleitung

EnglisH
8
The metal parts of the toaster become hot during toasting. Do not touch them.
Note: You can stop the toasting process and pop up the bread at any time by pressing the stop button
on top of the toaster (Fig. 6).
 To adjust the browning setting during toasting, press the + button for darker toast or the –
button for lighter toast.
The light of the selected browning setting lights up.
,
5 To remove smaller items, move the toasting lever upwards a little further when the bread
pops up.
If bread gets stuck inside the toaster, remove the plug from the wall socket and let the appliance
cool down completely. Then carefully remove the bread from the toaster. Do not use a knife or
another sharp metal tool to do this and do not touch the metal parts inside the toaster.

Toasting frozen bread

1 Put one or two slices of frozen bread in the toaster.
 Select the desired browning setting (see section 'Toasting bread').
 Push down the toasting lever.
 Press the defrost button (Fig. 7).
The defrost button lights up.
,
Note: Toasting frozen bread takes longer than toasting defrosted bread.
Reheating toasted bread
The toaster has an automatic reheat function that reheats toast without making it browner.
1 Put the toasted bread back into the toaster.
 Push down the toasting lever.
 Press the reheat button (Fig. 8).
The reheat button lights up.
,
Note: When you use the reheat function, you cannot change the browning setting.
Warming up rolls and croissants
1 Push down the warming rack lever to unfold the warming rack (Fig. 9).
Never put the items to be heated up directly on top of the toaster. Always put them on
the warming rack to prevent damage to the toaster.
 Put the rolls or croissants on the warming rack.
Do not heat up more than 2 items at a time.
 Push down the toasting lever.
 Press the warming button (Fig. 10).
The warming button lights up.
,
If you want to warm up the rolls or croissants on both sides, turn them after the toaster has
switched itself off. Then switch on the toaster again by pushing down the toasting lever and pressing
the warming button .
Note: When you use the warming function, you cannot change the browning setting.
Note: Before every new warming cycle, you have to push down the toasting lever and press the warming
button again.