Troubleshooting - Canon PIXMA TS300 Serie Inbetriebnahme

Procedures below vary depending on iOS or Android. Select your operating system and proceed to its
procedure.
a Tap Settings on your smartphone's home screen,
and tap Canon_ij_XXXX in the Wi-Fi settings.
If Canon_ij_XXXX does not appear on the list, see
"Troubleshooting" below to operate the printer, and
then repeat step a.
b Tap the installed application software.
c Follow the on-screen instructions to register the
printer.
Follow the on-screen instructions to proceed
with the setup.
If you select Auto Select Conn. Method
(recommended) on the connection method
selecting screen, the appropriate connection
method is selected automatically depending on
your environment.
d Make sure that the following screen appears.
The connection with your smartphone is now complete. You can print from your
smartphone.
To print photos, load photo paper. Proceed to "Loading Photo Paper" on page 8.

Troubleshooting

Printer is not found from your smartphone.
a Press and hold the Direct button on the printer for about 2 seconds until the Direct lamp starts to flash.
b Return to the operation of your smartphone.
a Tap the installed application software.
b Follow the on-screen instructions to register the
printer.
If a message saying "Printer is not registered.
Perform printer setup?" does not appear, see
"Troubleshooting" below to operate the printer, and
then wait for a while until the message appears.
Follow the on-screen instructions to proceed
with the setup.
The appropriate connection method is selected
depending on your environment.
c Make sure that the following screen appears.
Flashing
7