Canon PIXMA TS300 Serie Inbetriebnahme Seite 3

1. Unpack Box
□ Power cord
□ Setup CD-ROM for
Windows PC
2. Remove Tape and Turn on
1
Stand the printer on its back and remove the
orange tape stuck to the bottom of it. Return the
printer to its original position.
a
b
c
2
Remove the packing materials (such as orange
tape) from outside the printer.
3
Open the cover.
□ FINE cartridge
□ Safety and Important Information
□ Getting Started (this manual)
4
Remove the orange tape and the protective
material and discard them both.
5
Close the cover.
6
Connect the power cord.
Do not connect any cables except the power cord yet.
7
Press the ON/Stop button.
The ON lamp lights.
Lit
• If the Alarm lamp (A) flashes 9 times at a time,
press the ON/Stop button to turn off the power,
and then try again from step 3 of chapter 2
"Remove Tape and Turn on".
• If the Alarm lamp (A) flashes 4 times at a time,
proceed to the next step as it is.
(A)
Flashing
1