Samsung ET-WV523 Bedienungsanleitung Seite 8

Using the SmartThings Wifi/Hub
SmartThings Wifi/Hub
1
Connect one end of the Ethernet cable to the hub's WAN port (IN) and the other end to
the modem's LAN port.
2
Connect the adapter to the SmartThings Wifi/Hub.
The SmartThings Wifi/Hub will turn on and the indicator light will flash green.
Use only Samsung-approved adapters (12 V/2.1 A or higher).
• Y ou can use the SmartThings Wifi/Hub only when you connect the SmartThings
Wifi/Hub to an adapter.
• I f the SmartThings Wifi/Hub temperature exceeds 55 °C, the internal fan will
automatically activate (ET-WV533 only).
• I f the SmartThings Wifi/Hub overheats for a prolonged period, the SmartThings
Wifi/Hub may automatically turn off or reset. When this happens continually,
disconnect the adapter from the SmartThings Wifi/Hub and contact a Samsung
Service Centre.
• T o save energy, unplug the adapter when not in use. The adapter does not have a
power switch, so you must unplug the adapter from the electric socket when not in
use to avoid wasting power. The adapter should remain close to the electric socket
and be easily accessible while using it.
• T he socket-outlet shall be installed near the equipment and shall be easily
accessible.
Mobile device
3
Launch the SmartThings app on the mobile device.
4
Follow the pop-up window's instructions to turn on the Wi-Fi and Bluetooth auto on
feature.
When you launch the SmartThings app, the Wi-Fi and Bluetooth features will be
automatically activated.
English (UK)
8
6