Caso PRO3500 Bedienungsanleitung Seite 16

Operating the device
•
Plug the power plug into a suitable outlet. 
The temperature of the cooker plate surface displayed: is the temperature of the surface of the
induction cooker lower than 50°C, the display shows "-L-". When the temperature of the
cooker plate surface is over 50 °C, it is displaying "-H-".
device is in standby mode.
•
Place suitable cookware in the centre of the induction cooking field and press the ON/Standby
button once. When you have done that, the "ON/Standby" light starts to blink and an audible
signal sounds.
•
Note: If no further input occurs within 30 seconds of the device switching on, the light in the
display is turned off and the device goes into stand-by mode. To restart the device, press the
ON/Standby button once more.
•
You can select one of 10 power levels with the WATT function button. The level selected with
the arrow keys is shown in the display. The first 3 power levels are for keeping food and liquids
warm without cooking.
•
The temperature function button (TEMP.) allows you to select the temperature level which will
then be shown in the display. The preset temperature level is 120°C. You can set temperatures
between 60°C and 240°C using the arrow buttons.
•
You can set the different cooking times with the TIMER function button. After pressing this
button the display shows the digit 0. You can set the desired time (max. 180 minutes) in
1-minute intervals using the arrow buttons. When the set time has elapsed an audible signal
sounds and the device automatically switches to stand-by mode.
•
After a short time the display returns from the timer setting back to the set temperature or
power level. The timer runs in the background and can be called up by pressing the timer
button.
•
Note: You can always change the set time using the arrow buttons. The previously set
temperature and power level remain unchanged. If the power or temperature level is reset, the
selected time remains unchanged.
•
Disconnect the power plug from the power outlet as soon as the cooking process has ended.
•
In power mode the maximum temperature is limited to 170°C. Higher temperatures trigger the
overheat protection. You should use this mode for cooking food and heating water.
•
In temperature mode the maximum temperature is limited to 240°C. Higher temperatures
trigger the overheat protection. You should use this mode for roasting food when fat needs to
be heated to a high temperature.
•
When you switch off the device via "On/Standby" and the temperature of the cooker plate
surface is lower than 50°C, the display shows "-L-". When the temperature of the cooker plate
surface is over 50 °C, it is displaying "-H-".
A
n acoustic signal sounds. Now the
16