Assembly And Setup; Changing The Saw Blade - Cocraft LXC Serie Original Bedienungsanleitung

Assembly and setup

Always remove the battery from the saw before changing the blade performing
any adjustment, service or maintenance.

Changing the saw blade

Always wear gloves when changing the blade.
The saw blade can be fitted with the teeth pointing upwards or downwards.
Fitting the blade with the teeth pointing downwards is usually preferable,
but for some tasks it is sometimes better to have the teeth pointing upwards.
1. Pull forward the blade lock tab to open the blade clamp and insert the blade.
2. Release the blade lock tab.
Blade thicknesses can vary depending on the manufacturer.
This could result in the blade lock tab springing back to varying degrees.
3. Make sure that the blade is locked securely in the clamp.
Instructions for use
• Make sure that the saw blade is locked in the blade clamp before starting to saw.
• Make sure that the workpiece is securely anchored or clamped to prevent it
slipping (especially small or light workpieces). It is the saw that you want to move,
not the workpiece.
• Mark the cut line clearly before starting to cut.
• Adjust the footplate so that it rests against the surface of the workpiece.
• Hold the saw in a firm grip at a comfortable working distance from the workpiece
and make sure that the blade is not touching anything when the saw is turned on.
• Start the saw by pressing in the power trigger.
• Move the blade carefully towards the workpiece. Do not overload the saw –
let it work at its own pace. It is the saw blade that should do the work; do not force
the blade into the workpiece.
7