Tack life S3-50 Bedienungsanleitung Seite 10

● Read / Delete the Record:
Short press button
Short press
all the records. Press
When the storage is full, the screen will display the
● Angle measurement
The angle information is displayed at the top of the screen, and the angle
measurement range is -90.0° to 90.0° .
Tips
You may get some warning information as below:
Info
message
Err
Err1
Err2
Err3
Err4
Err5
Err6
, read the records by press button
to delete recent record and long press
or
Cause
Out of distance
measurement
range
Signal is too weak
Signal is too strong
Low battery voltage
The working
temperature is out
of working range
Pythagoras
measuring error.
Angle sensor error
to exit rec ord mode.
Use the device within the range
Chose the surface with stronger
reflectance. Use the reflecting
plate.
Chose the surface with weaker
reflectance. Use the reflecting
plate.
Change the power supply.
Use the device in the specified
temperature.
Re-measure and ensure that
Hypotenuse is bigger than
Cathetus.
Depot Repair
- 08 -
and
to clear up
mark.
Solution
.