Residual Risks - Tack life PCD02B Bedienungsanleitung

● Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
● Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking
into account the working conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous situation.
General Power Tool Safety Warnings – Service
● Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
General Battery Pack / Charger Safety Warnings
● Use power tools only with specifically designated battery packs. Use of any other battery packs
may create a risk of injury and fire.
● When battery pack is not in use, keep it away from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects, that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns or a fire.
● Recharge only with the charger specified by the manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when used with another battery pack.
● Do not charge other battery packs. The charger is only suitable for use with the supplied battery
pack and with the voltages specified in the technical data. Otherwise, there is a risk of fire and explosion.
● Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
● In case of damage and improper use of the battery, vapours may be emitted. Provide for fresh air
and seek medical help in case of complaints. The vapours can irritate the respiratory system.
● Do not open the battery. There is danger of a short circuit.
● Do not short-circuit the battery. There is danger of explosion.
● Batteries must not be exposed to mechanical impacts.
● Protect electrical parts against moisture. To prevent an electric shock, never immerse them in water or
other liquids during cleaning or operation. Never hold the charger under running water. Please
observe the instructions for cleaning and maintenance.

Residual risks

Danger!
Do not expose the battery to temperatures above 45 °C! Do not let the battery come into
contact with water or fire! Avoid direct sunlight and moisture. There is a risk of explosion!
Caution
Set the torque and rotational direction according to the operating mode. A wrong selection
may damage the device.
- 03 -