Intended Use - Tack life PCD02B Bedienungsanleitung

For your own safety thoroughly read the operating manual!

Intended use

Only use the device PCD02B 10-12V
●
for screwing,
●
for drilling in wood, plastic and metal, whilst adhering to the technical data (see operating manual).
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
General Power Tool Safety Warnings – Work area safety
●
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
●
Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
●
Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control.
General Power Tool Safety Warnings – Electrical safety
●
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce
risk of electric shock.
●
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
●
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
●
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords increase the risk of electric shock.
●
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric shock.
- 01 -