Optional Accessories - Kathrein CAS 09 Anleitung

Offset parabolic antennas
Features
■
Refl ector made of aluminium, powder coated
■
Feed system support made of galvanised sheet steel,
plastic coated
■
Mast clamp made of sheet steel, hot-dip galvanised
■
Optimal electrical data combined with very compact
mechanical dimensions due to offset feed
■
Available in graphite, white or red brown
■
Items supplied: Refl ector, mast and feed system support,
hexagon key (size 5)
Proper use (use for the intended purpose)
The CAS 09/90/90/R parabolic antenna is intended solely for the reception of satellite signals and for use only as a domestic
antenna.
DIN 4131 specifi es that a domestic antenna should have no more than 6 m free mast length and a fi xed-end moment up to 1650 Nm.
It is unsuitable for mounting on structures that are liable to vibration.
Make absolutely sure that the values for the maximum load listed in the Technical Data (on the last page) are complied with. If this load
is exceeded, parts could break away!
The CAS 09/90/90/R parabolic antenna is designed for use with one feed system (LNB) for reception of the signals from one satellite
position, or two feed systems for multi-feed applications for reception of the signals from two satellite positions with 3°-4° or 6° satellite
spacing.
When the additional ZAS 90 multi-feed adapter plate is used, the parabolic antenna is also suitable for three feed systems. The feed
systems and instructions for their installation are not included in the scope of supply of the parabolic antenna.
Do not use the parabolic antenna for purposes other than those listed in this manual! Any use other than that specifi ed
above will invalidate the warranty or guarantee.
In particular, never
• modify any of its components or
• fi t any components other than those expressly intended by the manufacturer for use with the antenna.
Breach of these rules may lead to the antenna no longer being suffi ciently stable and safe!

Optional accessories

■
ZAS 90 (BN 218684) multi-feed adapter plate
Installation positions 2 and 3 cannot both be
occupied at the same time. Refer to the website
(http://www.kathrein.de/de/ sat/index_satpos.htm)
to fi nd out the elevation values for your location by
means of an azimuth/elevation calculation.
■
Without additional components, two universal feed systems
to receive the signals of satellites 3° or 4° (e.g. ASTRA
19.2°/23.5°) or 6° apart (e.g. ASTRA/EUTELSAT-HOTBIRD)
can be mounted on the boom
For any other combination, the ZAS 90 (BN 218684) multi-
feed adaptor plate (see below) is required in addition.
1 / 36
CAS 09
CAS 90
CAS 90/R
216083
216224
216262