Electrolux LFT316X Gebrauchsanleitung Seite 5

3. MAINTENANCE
Thorough servicing guarantees
correct and long-lasting operation.
Any fat deposits should be remo-
ved from the appliance periodically
depending on amount of use (at least
every 2 months). Avoid using abra-
sive or corrosive products. To clean
painted appliances on the outside,
use a cloth dipped in lukewarm wa-
ter and neutral detergent. To clean
steel, copper or brass appliances
on the outside, it is always best to
use specifi c products, following the
instructions on the products them-
selves. To clean the inside of the
appliance, use a cloth (or brush)
dipped in denatured ethyl alcohol.
Clean grease fi lters in relation to use, at least
every 2 months to prevent the risk of fi re.
Hand wash or clean in a dishwasher using a
neutral detergent. If washing in the dishwa-
sher, possible discoloration of the fi lters does
not in any way compromise their functioning.
The activated charcoal fi lter is not washable
and cannot be regenerated, and must be
replaced approximately every 4 months of
operation, or more frequently for particularly
heavy usage.
4. CONTROLS
Model LFT316X:
Key A: light switch.
Key B: fi rst speed motor ON/OFF switch.
Key C: second speed switch.
Key D: third speed switch.
Models LFT416X, LFT419X, LFT419W,
LFT419K:
1 : fi rst speed motor.
0 : motor ON/OFF.
2 : second speed switch.
: light OFF
: light ON
5. LIGHTING
Disconnect the hood from the electricity.
Model LFT316X:
Warning! Prior to touching the light bulbs
ensure they are cooled down.
Replace it with lamps of the same type (ø35,
E14, 4W).
ILCOS D code: DRBB/F-4-220-E14-37/105
Models LFT416X, LFT419X, LFT419W,
LFT419K:
If the light spot is damaged, it must be re-
placed only by the manufacturer, its service
agent or similarly qualifi ed persons in order to
avoid a hazard.
ENGLISH 5