Messaggi Di Avviso; Incidenti Durante L'affilatura - Husqvarna PG820 RC Bedienungsanweisung

Messaggi di avviso , il telecomando
• The machine has detected a fault. Go to 'ERROR LOG' to see the faults that have been detected on the machine
and possible measures to take.
REV FWD
0
SPEED
0
POWER
0
OFFSET 0
Codice
Messaggio sul display
guasto
0x010201
0x010202 Machine battery error, contact service!
0x010228
0x01020B Low battery level!
0x01020F Temperature in machine is too high!
0x01020E Temperature in machine is too low!
Traction overload, check that machine is not
0x010108
blocked!
0x010540 Radio error, contact service if error persists!
Temperature measurement not working, contact
0x01070D
service!
0x020202
Remote control battery needs to be replaced!
0x020228
0x020540 Internal error in remote control, contact service!
0x02000E Temperature in remote control is too low!
Incidenti durante l'affilatura
Interferenze nella comunicazione radio
Se il display torna a una delle schermate iniziali a causa di interferenze nella comunicazione radio tra il telecomando e
la molatrice, cambiare il canale radio. Per ulteriori informazioni, fare riferimento alla 'Descrizione del sistema dei menu',
sezione 'CANALE RADIO'.
• Accertarsi che la manopola STOP/RUN sul telecomando sia impostata su STOP (ruotare in senso antiorario).
182 – Italian
RICERCA DEI GUASTI
SERVICE
Jan 05 12:45
REV FWD
ERROR LOG
0
SPEED
WARNING
0
POWER
Code: 0x00010201
OK
Jan 05 12:45 Jan 05 12:45
ERROR
OK
Machine battery error, contact service!
Code: 0x00010201
OK
OK
Causa
Battery not working
Battery charge short circuit
Battery charge time out
Battery low level
Machine temperature is high, battery charging is not
enabled
Machine temperature is low, battery charging is not
enabled
Traction motors are overloaded
No contact with radio
Machine temperature can not be determined.
Battery charging is not enabled
Battery charge short circuit
Battery charge time out
No contact with radio
Low temperature in remote control.