Axis Q6055-C Bedienungsanleitung Seite 17

AXIS Q6055-C PTZ Dome Network Camera
1
Power LED indicator
2
Network LED indicator (4x) ETH 1/2/3/4
3
Camera LED indicator
How to install the network camera
NO NO TICE NO TICE TICE
To comply with the IP66-rated design of the camera and maintain the IP66 protection, the
supplied multiconnector cable shall be used.
Remove the protective packaging between the camera and the sunshield before installing the
camera.
1. Install the selected bracket according to the instructions supplied with the bracket. If
drilling is required, make sure to use drill bits, screws, and plugs that are appropriate for
the material.
2. Route the multicable through the holes in the mounting bracket.
3. Secure the camera using the supplied safety wire.
17