Axis Q6055-C Bedienungsanleitung Seite 12

AXIS Q6055-C PTZ Dome Network Camera
2. Insert an SD card into the SD card slot.
3. To attach the dome cover to the top cover, align the bulge on the dome cover with the
heater on the camera unit and tighten the screws (torque 1.5 Nm).
How to install AXIS T8607 Media Converter Switch
The supplied media converter switch enables the multicable to send power from the power supply
(sold separately) and to send and receive data to and from external alarm devices and the network.
NO TICE TICE
NO NO TICE
• Make sure the connections to the mains supply and conduits have been installed by a
trained professional, according to the manufacturer's instructions and in compliance
with local regulations.
• The power supply (sold separately) and the media converter switch shall be installed in an
environment protected against dust and water, for example indoors or in an appropriate
cabinet.
Important
Axis can only guarantee full functionality with the supplied media converter switch. No
other devices are supported.
1. Make sure the mains supply is switched off.
2. Mount the power supply and the media converter switch on the wall or, if applicable,
attach them to a DIN rail in the cabinet. If drilling is required, make sure to use drill bits,
screws, and plugs that are appropriate for the material.
3. Loosen the screws and remove the cover from the media converter switch.
1
Screw (2x)
2
Cover
12