MD mXion RBM Bedienungsanleitung Seite 15

25 L4 / K4 address high
26 L4 / K4 address deep
27 L4 / K4 time delay
28 L4 / K4 inversion
29 L4 / K4 configuration
Value
0 Feedback Returns turnout address
1 Switch switching command Switches the turnout
address when the contact closes
2 Feedback level control Returns the turnout
3 Switch level control Switches soft level-
dependent (open / close ➔ right / left)
4 Feedback dependent on direction Signals switch
address dependent on direction (2 contact inputs
➔ Returns the last connected one)
5 Switch depending on direction Switches on
depending on direction (2 contact inputs ➔
6 Feedback module Returns the switch address
+128 Configure K as input Configures K output as
S88 always works without configuration, configuration only affects XpressNet
feedback / switching commands.
15
0 W
1 W
0 W
0 W
6 W
APPENDIX 1 - Contact Configuration
Use
address by level
Switches last address)
switching input
1 - 2048 Switch address which is confirmed or
switched (depending on configuration)
0 – 255 Message delay / delay switch
0/1 0 = normal, 1 inverted
0 – 6
Feedback Returns turnout address
Switch switching command Switches the
turnout address when the contact
Feedback level control Returns the
turnout address by level
Switch level control Switches soft level-
dependent (open / close ➔ right / left)
Feedback dependent on direction
Signals switch address dependent on
direction (2 contact inputs ➔ Returns
the last connected one)
Switch depending on direction Switches
on depending on direction (2 contact
inputs ➔ Switches last address)
Feedback module Returns the switch
Configure K as input Configures K output
see Annex 1
Comment
closes
address
as switching input
RBM