K1-K4 kann als Eingang konfiguriert werden.
Damit ist es möglich, externe Schalter rückmelden
zu können oder gar komplexe Schaltaufgaben
abarbeiten zu können. Entsprechend der CV-Liste
muss der jeweilige K-Ausgang als Eingang
umgestellt werden und bei Bedarf kann eine
Sonderfunktion eingestellt werden.
Manche Sonderfunktionen arbeiten mit 2
Kontakteingängen (bspw. richtungsabhängiges
Schalten). Damit braucht man 2 Kontaktausgänge
welche als Eingang konfiguriert werden und
zusammen eine Schaltaufgabe übernehmen.
Zentrale/Booster
Central/Booster
10
K1-K4 can used as input. This makes it
possible to confirm external switches to be
able to or even complex switching tasks to
be able to work off. According to the CV list
the respective K output must be input can be
converted and if necessary, a special function
can be set.
Some special functions work with 2 contact
inputs (e.g. direction-dependent turn). This
requires 2 contact outputs which are configured
as input and together take over a shift task.
RBM