Safety Instructions; Frequently Asked Questions - i-tec C31MBPADA Gebrauchsanweisung

EN i-tec USB-C MacBook Pro Docking Station + Power Delivery
CONNECTING USB DEVICES
You can use the USB 3.0 port for connecting your keyboard,
mouse, external hard drive, printer and other devices or you
can use it for connection of an USB HUB by which you will
gain some more free USB ports. In this case we recommend
using a HUB with an external power source. If the device
is not charged or does not work, connect the original USB
Type-C power adapter to the USB Type-C port of the adapter
for support of charging.
Possible modes of connected devices:
Mode 1 – another monitor or data
Mode 2 – charging of MacBook and USB 3.0 devices
Mode 3 – closed MacBook's lid
6
MODE 1
MODE 2
Quick Start
You can solve most problems by disconnecting Docking
station from your MacBook and reconnecting it after 10s.

SAFETY INSTRUCTIONS

• Do not expose to extreme temperatures and air humidity
• Use the device on flat surfaces – you will prevent it from
slipping and falling to the ground.
• Save the user manual for a possible use later.
In cooperation with the service department:
• Check functionality after falling to water or to the ground.
• Check functionality when the cover is broken.
• Send the device back if it does not work in accordance
with the user manual.

FREQUENTLY ASKED QUESTIONS

Question: I am using MacBook's Bootcamp with Windows
10. Will my adapter work?
Answer: Yes, Docking station is fully compatible with
Windows 10 on MacBook. Installation is also identical.
Question: Can I get more detailed information on the
problems related to the USB Type-C adapter?
Answer: Of course, you can contact our technical help.
Question: The device does not charge an Apple / Samsung
tablet.
Answer: If the device connected to the USB 3.0 port is not
charged or does not work, connect the original USB Type-C
power adapter to the USB Type-C port
support of charging. Unfortunately despite the European
standard on unification of the power supply devices some
companies protect their products by allowing charging
these products only with the original / licensed power
adapter through the USB Type-C port.
MODE 3
of the adapter for
EN
7