Specifications - Makita BJS100 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Button
1-2. Red part
1-3. Battery cartridge
2-1. Switch lever
3-1. Indicating lamp
4-1. Hex wrench
4-2. Screw
5-1. Center blade

SPECIFICATIONS

Max. cutting capacities
Min. cutting radius
Strokes per minute (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for cutting sheet steel and stainless
sheet steel.
For Model BJS160
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : cutting sheet metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Explanation of general view
5-2. Thickness gauge
5-3. Side blade
5-4. Hex wrench
5-5. Hex socket head bolt
6-1. Hex wrench
7-1. Oil supply
7-2. Center blade
7-3. Pin
Model
Steel up to 400 N/mm
Steel up to 600 N/mm
Aluminum up to 200 N/mm
-1
)
Overall length
Net weight
Rated voltage
) : 74 dB(A)
pA
2
) : 12.0 m/s
h
2
BJS160
2
1.6 mm (16 ga.)
2
1.2 mm (18 ga.)
2
2.5 mm (13 ga.)
250 mm
4,300
362 mm
1.9 kg
D.C. 14.4V
ENE037-1
For Model BJS161
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
ENG104-1
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : cutting sheet metal
Vibration emission (a
ENG218-2
Uncertainty (K) : 1.5 m/s
For Model BJS100
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
3
10-1. Limit mark
11-1. Brush holder cover
11-2. Notch
11-3. Screwdriver
12-1. Brush holder cap
12-2. Screwdriver
BJS161 BJS100
1.0 mm (20 ga.)
0.7 mm (23 ga.)
2.5 mm (12 ga.)
364 mm
2.0 kg 1.9 kg
D.C. 18V D.C. 14.4V
) : 71 dB(A)
pA
Wear ear protection.
) : 13.0 m/s
h
2
) : 71 dB(A)
pA
Wear ear protection.
BJS101
30 mm
4,300
2.0 kg
D.C. 18V
ENG104-1
ENG218-2
2
ENG104-1