NSK S-Max M205 Benutzerhandbuch Seite 3

CAUTION
· Read this Operation Manual before use to fully understand the product functions and file for future reference.
· When operating the product always consider the safety of the patient.
· This product does not consider patient's age (except infants), gender, weight or nationality.
· This product does not consider operator's age (mature person), height, weight, gender, or nationality.
· Users are responsible for the operational control, maintenance and continual inspection of this product.
· Do not attempt to disassemble the product or tamper with the mechanism except as recommend by NSK in this Operation Manual.
· Do not allow any impact on to the product. Do not drop the product.
· Operators and all others in the area must wear eye protection and a mask when operating this motor.
· Should the product function abnormally, cease operation immediately and contact your Authorized NSK Dealer.
· Do not use high acid water or sterilizing solutions to wipe, immerse or clean the product.
· The products are delivered in a non-sterile condition and must be autoclaved prior to use.
· Perform regular function and maintenance checks.
· If the product is not used for a long period check it is functioning correctly before using on a patient.
· To avoid clinical downtime it is recommended that a spare be kept on hand in case of a breakdown during surgery.
· U.S. Federal law restricts this device to sale by or on the order of a licensed physician.
2
3. Setting of Air & Water Supply Pressure
Measure the supply pressure at the handpiece / hose connection point and set the pressure to the value
specified on the specification table. (Fig. 1)
For Multi Gauge information refer to Option Parts List.
WARNING
Do not exceed the optimum pressure specified on the specification table.
CAUTION
Do not use air contaminated by dust, moisture and oil.
Chip Air Pressure
Exhaust Exhaust Exhaust Exhaust Exhaust
Water Pressure
Air Pressure Air Pressure Air Pressure Air Pressure Air Pressure
Hose
Drive Air
Pressure
Motor
Fig. 1
3