Inhaltsverzeichnis
Werbung
GRUNDIG Service
EXPERT LEVEL
_______________________________________________________________________________________________________
16: Time setting
17: Year setting
18: Date setting
19: Standby Clock – On or off. The time is dis-
played when the ignition is switched on.
20: Ignition – Switching on and off
– Display: »Ignition On« – The car radio can be
switched on and off with the vehicle ignition.
– Display: »Ignition Off« – The device can only
be switched on and off by pressing »IO«.
21: CD Level setting
CD unit volume adaptation.
22: MCD/Aux/MP3 Level setting
CD changer volume adaptation
(if connected).
23: Display – Setting the positive or negative
display.
– Display: »Blue« or »White«.
24: Display contrast – Setting the contrast for
the display field.
– Display: »Disp Contrast«, bordered display.
25: Day/Night – Adaptation to the instrument
illumination.
– Display: »On« or »Off«.
CODING
__________________________________________________________________________________________________________
The code number for the device can be found on
the identity card. Coding is not activated by
default. When the coding is activated, the dev-
ice is electronically secure. Following removal, it
can only be switched on again if the code num-
ber is re-entered.
Activating coding
Select the EXPERT level by pressing
1
until EXPERT appears in the display.
Select »Protection« using the
2
knob.
Press
briefly.
3
SOUND
– Display: »----« flashes.
Enter the code number by pressing memory
4
buttons »1« – »4« repeatedly.
16
16
ENGLISH
ENGLISH
26: AF Enable – On or off. The DAB module can
use alternative frequencies if this is available.
27: DAB –> RDS – (If 26: on) – On or off. If the
DAB reception is bad, you can switch back to an
appropriate RDS station.
28: RDS –> DAB – (If 26: on) – On or off. If the
same station is available in FM on DAB, the
device switches to DAB.
29: DAB Linking – (If 26: on). Program tracking
if reception is bad. Switches to programs with
the same content (hard), or to programs with
similar content (soft), or switches off (off).
30: DRC – On or off. Dynamic range control - pro-
duces natural playback for programs with a high
volume dynamic (e.g. classical music). The DAB
station must be offering this additional information.
31: Rec. Limit – On or off. Changing the search
speed. Checks the reception qualities of a DAB
ensemble.
Receive Limit = off: every frequency is tested as to its
reception quality.
Receive Limit = on: only the strength of the signal
is tested. This generally speeds up the search.
Example: Code number 1703
»1« Press briefly once
»2« Press briefly seven times »1700«
»3« Press briefly ten times
»4« Press briefly three times
5
Briefly press
SOUND
– Display: »SAFE« – Coding is activated.
SOUND
6
To quit the EXPERT level hold down
until you hear the signal.
volume
Deactivating coding
If, for example, you want to remove the dev-
1
ice, select the EXPERT level and select
»SAFE« on the display.
To deactivate the coding, repeat steps
2
1 - 13
32: Short IS – On or off.
When the device is switched on, the last station
you were listening to comes on.
Short IS = on: when the device is switched on, the
last 5 ensembles are also tested for their recepti-
on qualities.
Short IS = off: only the last station is available.
Renewed operation when
coding is active
»1000«
Switch on the car radio.
1
– Display: temporarily »SAFE«, then
»1700«
»1----«.
»1703«
– The »1« indicates the number of attempts
to confirm.
at entering the code.
Enter the code number using the station but-
2
SOUND
tons »1«, »2«, »3«, »4«.
Press
3
SOUND
– The radio is in operating mode.
Note:
Only enter the correct code number! Take
note of the increasing waiting time between
attempts.
to 6.
3
After the sixth failed attempt we recommend
that you have a specialist dealer enter the
code.
The waiting time not elapsed is displayed.
Allixx SCD 5410 DAB
15
15
ENGLISH
ENGLISH
to confirm your entry.
Werbung
Inhaltsverzeichnis
