Inhaltsverzeichnis
Werbung
GRUNDIG Service
CD MODE WITH CD CHANGER
Selecting the CD changer input
source
This function is only possible if a CD changer is
connected.
1
Keep pressing the
SOURCE
see »MCD« in the display, followed by the CD
you have just selected.
Selecting a CD directly
6 CD changer:
Select the CD with the memory buttons 1...5
1
I
or with »
«.
I
I
10 CD changer:
1
Select the first 5 CDs with the memory
buttons 1...5.
I
The »
« button switches to the second level.
2
I
I
Select the next 5 CDs (CDs 6 – 10) with the
3
memory buttons 1...5.
After a short while the function ends auto-
4
matically.
EXPERT LEVEL
_______________________________________________________________________________________________________
6
To carry out the next setting repeat steps
5.
7
To quit expert level keep pressing
until you hear the signal.
The individual settings
1: Language – English, German, French,
Italian: the selection of display languages.
2: Protection – Code settings to prevent theft –
see the detailed instructions starting on page
16.
3: ON Volume – Volume limit when switching
on.
– Display: »ON Volume ––«: no limit.
– Display: »ON Volume 00« to »ON Volume 30«:
a limit is entered.
4: Loudness – Boosts low frequencies at low
volumes
– Display: »Loudness« »low«, »normal« or
»high«.
5: SCV – Speed Controlled Volume
– Display: »SCV: Off«. SCV 1...140.
14
14
ENGLISH
Selecting a track
1
Keep pressing the
number of the track you want to hear, e.g.
»Tr. 06«, appears in the display.
CD playback functions
See the "CD mode" section on page 12.
button until you
Other AUX connections
If you are not using a GRUNDIG CD changer,
you can also connect other CD players or exter-
nal devices to the car radio using the
Hadok/GRUNDIG CDP adapter (available as
an accessory).
Keep
pressing
1
appears in the display (only if a CDP
Adapter is connected).
Note:
You must operate the connected devices them-
selves. See the relevant operating manuals.
2
to
A setting is only possible if there is a speed con-
trolled signal at the SCV connection (A1).
» SCV: Off« : SCV is switched off
SOUND
» SCV: 140 « : Maximum effectiveness
The speed change while driving is shown in the
top right section of the display, e.g. +4.
6: TP Mode – TP function on/off
- Display: on/off
When TP is »off«, the »TP« button is inactive.
7: TP Volume – Minimum volume for radio traf-
fic news.
– Display: »TP Volume 5« to »TP Volume 30«.
Volume level, bordered display.
8: Phone – Muting in car phone mode.
– Display: »Mute« – Muting of the car radio is
activated.
– Display: »Off« – Muting of the car radio is
not activated.
– Display: »On« – You hear the phone via the
speakers.
Note:
The phone mute signal (see page 17) must be
connected.
EXPERT LEVEL
To make the use of the device as simple as poss-
ible, a number of custom settings which are only
rocker switch
until the
required once or very occasionally are located
on a special operating level (EXPERT).
Changing EXPERT settings
1
Keep pressing »SOUND« until »EXPERT«
appears in the display.
Use the
2
required EXPERT setting, e.g. volume limit
on switching on. Display: »ON Volume: 3«.
until
»AUX«
SOURCE
To activate it, briefly press the
3
button.
– Display: »the selected programme, display-
ed inversely«. It is played at the volume dis-
played.
Use the »<« or »>« soft keys or the
4
knob
Briefly press
5
9: Beep – Signal tone on/off
– Display: »Beep On« – Signal tone for confirming
functions.
– Display: »Beep Off« – Functions are confirmed
by a brief muting of the loudspeakers.
10: AM Band – On/off
– Display: »On« – The AM range can be selected.
– Display: »Off« – The AM range is switched off.
11: SW Band – On/off
– Display: »On« – The SW range can be selected.
– Display: »Off« – The SW range is switched off.
12: Search level– Search sensitivity
– Display: »Local« – Reduced search sensitivity.
– Display: »DX« – Immediate increased sensitivity.
13: RDS Regional – Automatic changing of the
regional station
– Display: »On« or »Off«
– Display: »RDS Regional On« – Frequency
change only possible between regional stations.
– Display: »RDS Regional Off« – Station change
via automatic search.
14: Date Format
– Display: »DDMMYY« or »YYMMDD«
15: Clock »On«, »Off« or »RDS« (RDS synchro-
nisation)
Note: With RDS synchronisation, settings 16 -
18 disappear. When Time is Off, settings
15-19 disappear.
1 - 12
Allixx SCD 5410 DAB
to select the
volume knob
SOUND
volume
to select the required volume.
to conclude the setting.
SOUND
13
13
ENGLISH
ENGLISH
Werbung
Inhaltsverzeichnis
