Toro 51370 Bedienungsanleitung Seite 5

Connecting to a Power
Source
If you do not fully seat the extension cord on the
inlet plug, the loose plug could lead to
overheating and cause a fire, possibly burning
you or others.
Ensure that you fully seat the cord on the plug
and use the cord lock feature to secure the cord.
Important: Do not use a damaged cord.
Starting the Trimmer
To start the trimmer, squeeze the trigger.
Stopping the Trimmer
To stop the trimmer, release the trigger.
5
Trimming
Edging
m–6317
Lengthening the Line
To increase the length of
the cutting line, tap the
spool on the ground
while the trimmer is
running.
m–6412
Note: The blade under
the guard will cut the
line to the correct length.
Important: Use the following precautions to ensure
optimal line performance.
• Do not hold the spool on the ground.
• To help prevent line tangle, tap only once to
lengthen line. If additional line is required, wait a
few seconds before tapping the trimmer head.
• If the line is not advanced occasionally, it will
wear down to the eyelet. When the trimmer stops,
the short line may retract into the cutter head.
Should this occur, remove spool, refeed the line
through eyelet, and assemble spool to trimmer.
3352-872
m–6316
m–6325