Velleman WCM2 Bedienungsanleitung Seite 3

and the alarm should be activated between "11:58" and "12:02". The
alarm will automatically be deactivated after half an hour.
If necessary, the procedure outlined above should be repeated until the
alarm is activated between "11:58" and "12:02". The alarm time has
now been calibrated: the alarm will be activated max. 2 minutes before
or after any arbitrarily installed alarm time.
Use this device with original accessories only. Velleman
Components nv cannot be held responsible in the event of
damage or injury resulted from (incorrect) use of this device.
For more info concerning this product, please visit our website
www.velleman.eu. The information in this manual is subject to
change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is
owned by Velleman Components nv. All worldwide rights reserved.
No part of this manual may be copied, reproduced, translated or
reduced to any electronic medium or otherwise without the prior
written consent of the copyright holder.
WCM2_v2 3 VELLEMAN®