Ayce 0102B Bedienungsanleitung Seite 20

Note: The installation site
The monitored area to be reached by the rays of the motion detector. The monitored area must not
be obstructed by objects, because infrared radiation can not penetrate solid objects.
Depending on the area to be monitored, the smaller, the better the motion detector works. You can
restrict the coverage range by placing opaque material (such as tape).
2. Pull the cable through the gasket hole. Check carefully whether
the sealing opening in good condition is.
3. Connect the wires according fig. 5.
Fig. 5
Fig. 4
20
GB