TIPTEL easyBOX 300 Bedienungsanleitung Seite 33

2 Registration / programming
Function
Activate PARK number
The PARK number set under programming point 80 is not used
during the registration process.
The PARK number set under programming point 80 is used during
the registration process.
Factory setting: 0
PageTail
To ensure optimal operation on different DECT BBX bases, it may be
necessary to modify this parameter. In most cases the factory
setting is the right one. Please change this parameter only when
having additional information concerning your DECT PBX.
0: only dummy or C/L bearer
1: like 0 + other bearer
2: like 0 + recommended other bearer
4: like 0 + good RFP bearer
3: like 0 + other bearer + recommended other bearer
5: like 0 + other bearer + good RFP bearer
6: like 0 + recommended other bearer + good RFP bearer
7: like 0 + other bearer + recommended other bearer + good RFP
bearer
Factory setting: 3
Reset easyBOX
The easyBOX is reset to the factory settings. This means, however,
that the easyBOX is no longer registered on a base station. All
previous settings are deleted. After unplugging / plugging in the
adapter, the easyBOX is restarted and reprogramming of the
easyBOX can begin.
Parameter Other input
code
81
81
84
90
13
0 #
1 #
0...7#
#
UK