Prior To Commissioning; Starting To Work With The Machine; End Of Operation - Sealed Air TASKI vento 8S Anleitung

Prior to commissioning

Insert paper bag
1
2
4
5
6
• Replace the basket.
The top arrow must point in the direction of the intake.
• Replace the vacuum lid.
34
Connect the power cord and loop it into place
1
2
3
Mount the suction hose, suction tube and dust nozzle
• Assemble the suction hose, suction tube and dust nozzle
as shown in the picture in Configuration/Versions on page
37.
Application technique
Machine
Wet cleaning & base cleaning
Shampoo wet
Shampoo dry
Dry vacuuming

Starting to work with the machine

• Insert the power cord in the (mains) socket.
• Switch on the machine (ON/OFF).
On the pipe bend there is a vent hole which allows you to
regulate the suction power.
The supplied accessories (only for vento 15S) can be
mounted on the pipe or hose tube.

End of operation

• Switch off the machine (ON/OFF) and remove the power
cord from the socket.
• Wipe the machine with a moist cloth.
• Rewind the power cord starting at the vacuum lid using the
automatic cable rewind.
Attention:
Never clean the machine with high water
pressure or a water hose.
The penetrating water could seriously
damage the mechanical or electrical parts.
3
vento 8S/
15S
No
No
No
Yes