Max. Permissible Electrical Speed - TR-Electronic I__-582 Serie Benutzerhandbuch

Max. permissible electrical speed

3 Max. permissible electrical speed
The electrical maximum speed is independent of the mechanical maximum speed and
is a function of the programmed Pulses per Revolution.
When exceeding the electrical maximum speed this is reported with setting the
switching output "Speed" to high-level, see page 30.
If the electrical maximum speed is exceeded, by the measuring system no
more valid measured values are output!
 TR-Electronic GmbH 2015, All Rights Reserved
Page 26 of 35
It is mandatory for the operator to integrate the switching output "Speed"

of the measuring system into his own safety concept.
 If the switching output is set to high-level, because the electrical
maximum speed was exceeded, the system must be put into a safe state.
TR - ECE - BA - DGB - 0119 - 04
Printed in the Federal Republic of Germany
07/11/2018