Operation; Cleaning - Pepcare 16261022 Bedienungsanleitung

05. Operation

WARNING! Only use the device for dry hair.
NOTE: Before using for the first time, switch the device on for
a few minutes. As a result of the manufacturing process, a slight
odour may be produced. This is not harmful and only occurs during
initial use. Ensure that the room has good ventilation.
• Judge your hair sensibly: fine or damaged hair reacts to the treat­
ment more quickly than thick, healthy hair.
• The thinner the strands you are treating, the more intensive the
resultant styling effect.
Switching on and warming up
1. The hair straightener is equipped with a travel lock (4).
To unlock, press the heating plates together and push
the button on the side marked with the symbol
until it stops, ensuring that the side with the symbol
protrudes (see image). The hair straightener opens and
is ready for use.
2. Place the device on a heat­resistant surface.
3. Connect the mains plug to an easily accessible socket.
4. Use the temperature control (7) to select a temperature between
150 °C and 220 °C adapted to your hair.
5. Push the on­off switch to ON to switch the device on. The indicator
light lights up red. If the set temperature is reached, the indicator
light lights up green.
NOTE: Always select a low temperature when using the device
for the first time.
Select a medium to high temperature to straighten very thick and
curly hair or hair that is difficult to straighten. For normal to slightly
wavy hair, a low to medium temperature is recommended. Note that
high temperatures may affect blond, bleached or coloured hair.

22
Straightening
1. Dry the hair.
2. Comb the hair well.
3. Separate a strand of hair and comb it smooth.
4. Beginning at the roots of the hair, place the strand between
5. Slide evenly from the hair roots to the hair tips. Do not hold in the
6. Straighten all the hair in this way, strand by strand.
Switching off and cooling down
1. Push the on­off switch to OFF to switch the device off.
2. Disconnect the mains plug.
w
in
3. Allow the device to cool down before cleaning or storing it.
v
4. Press the heating plates together and push the travel lock button

06. Cleaning

• Do not use strong or abrasive detergents.
• Never use gasoline, spirit or other flammable detergents.
• Wipe the housing and heating plates with a slightly damped cloth.
the heating plates. When doing so, ensure an adequate distance
is maintained from the scalp!
same position for too long.
The indicator light goes out.
back. The hair straightener is locked now and can be stored.
DANGER!
• Before cleaning the device, disconnect the mains plug and
allow the device to cool down.
Wipe dry afterwards.

23