Installing The Wall Bracket - Becker tc4410-2 Bedienungsanleitung

FUNCTION
ROLLER SHUTTER/VENETIAN BLIND, INITIAL OPERATION (Selection of
the shading solution, date of initial operation)
AUTO
INITIAL OPERATION
1. Press the MENU button.
2. To select the FUNCTION menu, press the + button until FUNCTION ap-
pears.
3. Confirm with OK. ROLLER SHUTTER/VENETIAN BLIND appears.
4. You can choose between roller shutter/venetian blind using the +/- but-
tons.
5. Confirm with OK. EXPERT MODE OFF/ON appears.
6. You can select the desired setting using the +/- buttons.
7. Confirm your selection with OK. INITIAL OPERATION appears.
8. Confirm with OK. FUNCTION appears.
9. Press the MENU button to switch to Operating mode.

Installing the wall bracket

Wall bracket
Wall bracket
mounting
plate
FUNCTION
FUNCTION
Unlocking mechanism
ROLLER SHUTTER
AUTO
• Before installation in the de-
sired installation position,
check that the transmitter and
receiver are functioning prop-
erly.
• Fix the bracket to the wall with
the two screws enclosed.
EXPERT MODE
53 - en