Becker tc4410-2 Bedienungsanleitung Seite 37

You can make a note of the programmed channel in the la-
belling field underneath the transparent film.
If you keep the channel selection button pressed for 3
seconds, the channel selection sequence will change.
Channel indicator lamps
A radio signal is indicated by the corresponding channel indicator lamp light-
ing up.
The transmission strength and the radio range decrease as battery power de-
clines. If the channel indicator lamp no longer lights up when a button is
pressed, the battery must be replaced.
Operating mode
On the display, you see the time and the current operating mode e.g. HOLI-
DAY.
OK button
The displayed values are saved by pressing the OK button in the menu.
+/- buttons
The following operations are possible via + and -:
• Menu ->Modify value
• Automatic mode ->Retrieve information:
∙
+ button ->Next automatic switching time
∙
- button ->Next automatic switching time
∙
Hold - button and OK button -> Astro time
MENU button
By pressing the MENU button, you access the menu overview or Operating
mode.
The displayed value is not saved.
RESET button
By pressing the RESET button (with a ballpoint pen or similar), the unit is reset
to its factory settings.
Exception: Function, Language selection and City selection menu items.
Transmitter remains programmed in receiver.
37 - en