Overview Of Functions; Safety Instructions - Dennerle Duomat Evolution DeLuxe Bedienungsanleitung

Duomat Evolution DeLuxe
Measures the temperature electronically and controls bed
and water heating in aquaria automatically
- Be sure to read the instructions for use carefully and in their entirety before using this device.
Keep the instructions in a safe place. -
Congratulations on buying this high-quality dual aquarium thermostat from DENNERLE. You have chosen a state-of-the-art aquarium
device for the very highest professional requirements. If used properly and treated with due care, this unit will provide a simple,
convenient and precise means of automatically controlling your bed heating (DENNERLE Bodenfluter cable) and water heating as the
essential basis for fantastic plant growth and healthy fish. DENNERLE wishes you lasting enjoyment from your aquarium!

Safety instructions

• For 230 V AC / 50 Hz only.
• Only to be used in rooms subject to normal levels of dirt.
• The mains plug must be accessible at all times after installing the device.
• Ensure good cooling at all times, do not cover the device.
• All cables leading out of the aquarium and the mains leads of the employed devices must be provided with a drip
loop to prevent any water which may run down the cables from reaching items of equipment or the mains socket
outlet.
• Switch off all devices in the aquarium before carrying out maintenance work.
• Should the device's connecting lead be damaged, it is to be replaced by the manufacturer or the latter's after-sales
service personnel only, in order to avoid any dangers
• Always disconnect all devices located in the water from the power supply before placing your hands in the aquarium water.
• Note maximum output load for the unit's sockets (bed heating: 400 W, water heating: 800 W).
1 Overview of the Duomat
Mains lead
Power unit
Temperature sensor
Fuse - bed heating socket
Socket for bed heating
Socket for water heating
Fuse - water heating socket
Socket for display connecting lead
Mounting plate
Display
Front flap
22

2 Overview of functions

GB
No.
1
2
3
4
5
6
7
8
9
10
11
12
DENNERLE
Duomat Evolution DeLuxe
Key / component Functions / mode of operation
Temperature Indicates the current water temperature in the aquarium.
display Flashes when the measured value differs from the set value
by more than +/– 3 °C (alarm function)
°C To set the desired temperature:
Press key, set desired temperature with "+" and "–"
+
Increase setting
– Reduce setting
Indicator lamp LED ON = bed heating ON
Bed heating
Indicator lamp LED ON = water heating ON
Water heating
Summer mode Press key = Summer mode ON
Press key again = Summer mode OFF
Night-time To switch on night-time temperature reduction: Press key, then
temperature (1) enter the desired night-time reduction in temperature (max. 3 °C) with "+"
reduction and "–", then (2) enter the desired starting time for night-time temperature
reduction with "+" and "–". To switch off night-time temperature reduction:
Press key, then use "–" to set night-time temperature reduction to "0".
Time Press key = current time appears on display
To set the time: Press "+" or "–" key
Acoustic alarm Press key to activate the acoustic alarm (in addition to the visual alarm,
see 1) Press key again to switch off the acoustic alarm
Dimmer Press key and adjust the brightness of the display to the ambient light
conditions with "+" and "–"
Indicator lamp The keypad lock prevents unintentional alteration of the settings (child-proof
for keypad lock safety lock): Press "Dimmer" and "°C" simultaneously to activate the keypad
lock Press key combination once again to deactivate the keypad lock
23