Items Supplied; Safety Information; Intended Use - EINHELL TC-PT 2500 Originalbetriebsanleitung

Anleitung_TC_PT_2500_SPK7__ 29.03.16 14:27 Seite 9
Danger!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety information with due care. Keep these
operating instructions in a safe place so that the
information is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and the safety information as
well. We cannot accept any liability for damage or
accidents which arise due to failure to follow these
instructions and the safety information.

1. Safety information

Danger
Read all the safety regulations and instructions.
Any errors made in following the safety information
and instructions set out below may result in an electric
shock, fire and/or serious injury.
Keep all safety information and instructions in a
safe place for future use.
Pay attention to the accident prevention
n
regulations.
Never exceed the specified payload.
n
Do not use the pallet lifting truck until you have
n
familiarized yourself with its mode of operation
and been trained and instructed on how to use it.
Check the equipment for damage and make sure
n
that it is in good working order each time before
you use it.
Do not use the pallet lifting truck on uneven
n
ground or slopes.
The pallet lifting truck has no brake. It is not
n
allowed to be used on upward or downward
inclines.
Wear work gloves and safety shoes.
n
It is imperative to stay clear of the area under
n
lifted loads.
The load you want to transport must be
n
distributed evenly over the lifting forks.
Never transport loosely piled loads or unstable
n
loads.
The pallet lifting truck is not allowed to be loaded
n
when the lifting forks are in a raised position.
Loads on raised lifting forks must never be left
n
unattended.
Do not reach into moving parts.
n
Do not transport people.
n
Keep a minimum distance of 60 cm from other
n
persons when transporting loads.
The work area must be well illuminated.
n
2. Layout (Fig. 1)
1 Handle
2 Control lever
3 Drawbar
4 Hydraulic unit
5 Steering rollers
6 Lifting forks
7 Load-bearing rollers (tandem)

3. Items supplied

Open the packaging and take out the equipment
n
with care.
Remove the packaging material and any
n
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
n
Inspect the equipment and accessories for
n
transport damage.
If possible, please keep the packaging until the
n
end of the guarantee period.
Danger
The equipment and packaging material are not
toys! Do not let children play with plastic bags,
foils or small parts! There is a danger of
swallowing or suffocating!
Pallet lifting truck
n
Drawbar
n
Clamp sleeve
n
Bolt
n
Original operating instructions
n

4. Intended use

The equipment is designed for transporting goods on
pallets with an open base or with stringer boards
extending beyond the load wheels. The equipment
must be used on a firm, flat surface.
It is prohibited to use the equipment to pick up or
transport people.
Ambient temperature of -20°C to +40°C.
The equipment may only be used for its intended
purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
GB
9