Changing the Fuse:
If the fuse has been triggered, it must be replaced. A spare fuse is stored at
the underside if the unit.
• Pull the power plug and disconnect the unit from a battery, if connected,
before changing the fuse.
• Remove the blown fuse ("Fuse 10 A") and replace it with the spare fuse
("Spare Fuse").
• Use pliers to pull out the fuse, but be careful not to crush the fuse.
Cleaning:
• Clean the charger only with a damp cloth and let it dry completely before
using it again.
• Do not use aggressive or chemical cleaning agents.
Maintenance and Cleaning
7