Melitta Caffeo Varianza CS Bedienungsanleitung Seite 96

Care and maintenance
Symbol on the
selector switch
or buttons
96
Displays Steps
8. Insert the water tank again.
»
»
9. Turn the rotary regulator clockwise up
to the stop.
»
»
10. Empty the drip tray and the coffee
grounds container.
11. Insert the drip tray without the coffee
grounds container.
»
12. Place the coffee grounds container
beneath the Cappuccinatore.
13. Open the lid of the water tank and
pull the water tank upwards out of the
appliance by the handle.
14. Empty and clean the water tank.
15. Fill the water tank with fresh water
and re-insert it.
»
16. As soon as hot water no longer flows,
turn the rotary regulator anti-clock-
wise to the stop.
The descaling process starts.
After several minutes, the appli-
ance indicates that:
ū the third programme stage is
reached
ū the rotary regulator must be
actuated.
The descaling process is continued.
After several minutes, the appli-
ance indicates that the drip tray
and the coffee grounds container
must be emptied.
The appliance indicates that:
ū the fourth programme stage is
reached
ū the water tank must be filled.
Hot water flows into the coffee
grounds container.