Melitta Caffeo Varianza CS Bedienungsanleitung Seite 93

Buttons Displays Steps
4. Place the coffee grounds container
beneath the outlet.
5. Remove the brewing unit and clean
it as described in section 8.2 Cleaning
the brewing unit on page 88. Do not
switch off the appliance.
6. Place a cleaning table in the brewing
unit (see Fig. 18). Insert the brewing
unit into the appliance as described in
section 8.2 Cleaning the brewing unit
on page 88.
» The appliance indicates that the
third programme stage is reached.
» The cleaning process starts.
» After several minutes, the appli-
ance indicates that:
ū the fourth programme stage is
reached
ū the drip tray and the coffee
grounds container must be
emptied.
7. Empty the drip tray and the coffee
grounds container.
8. Insert the drip tray without the coffee
grounds container.
9. Place the coffee grounds container
beneath the outlet.
» The appliance indicates that the
last program stage is reached.
» The cleaning process is continued.
» The appliance then indicates
that the drip tray and the cof-
fee grounds container must be
emptied.
10. Empty the drip tray and the coffee
grounds container.
11. Insert the drip tray and the coffee
grounds container.
» The appliance is ready for operation.
Care and maintenance
93