Find My Band; Update Strap Software; Update Silvercrest Sat 70 Activity Tracker; Restore Factory Settings - Silvercrest 289546 Bedienungs- Und Sicherheitshinweise

product sketch product sketch
icon for APP
icon for APP
to select UV monitoring . Make sure that
Press and then
you have chosen the correct strap.
1. Open the SilverCrest SAT 70 Activity Tracker App. Swipe left for the
UV sensor view.
2. Place the product in the sun and press Test. After a few seconds the
UV radiation will be shown in the display.
3. To see more detailed statistics, press the UV radiation circle.

Find my band

In the SilverCrest SAT 70 Activity Tracker App, press
strap. Your product will vibrate and the LED 1 view will blink blue.

Update strap software

product sketch product sketch
1. Ensure that your smartphone is connected with the product and with
the internet via mobile data or WiFi.
icon for APP icon for APP
2. Press >
and follow the instructions on the display.
8 GB/CY

Update SilverCrest SAT 70 Activity Tracker

App
product sketch
1. Ensure that your smartphone is connected with the product and with
the internet via mobile data or WiFi.
icon for APP
2. Press

Restore factory settings

Android Version
product sketch product sketch
icon for APP icon for APP
> Find
>
product sketch
icon for APP
1. Press
2. Click OK to confirm. The product will restart automatically.
Note: when the battery level falls below 10 % the vibrate function is
turned on for all features.

Waterproofing (IP67)

Note: waterproofing is not a lasting feature, as the built-in seal elements
wear in their function and daily use and can also be damaged by impacts
or falling.
You can wear the product in every day life. Wash hands, showers,
rain or similar situations that activities are not harmful to product. The
product is protected against short immersion.
Do not use the product when diving.

Cleaning and care

Do not use aggressive cleaning agents, brushes with metal or nylon
bristles, or sharp or metal cleaning objects such as knives, hard
scrapers, or similar.
Only clean product with a soft, damp, lint-free cloth.
product sketch
icon for APP
> and follow the instructions on the display.
iOS Version
product sketch
icon for APP
and select Restore factory settings.
>