Led Indicator - TaoTronics Hello Anleitung

LED Indicator

Bluetooth indicator ashes red and blue Pairing
Bluetooth Indicator becomes solid blue Paired / connected in AUX mode
Charging Indicator On Charging
Charging Indicator Off Fully charged
Note：
• There will be a voice prompt when the battery is low.
• The unit will power off automatically if no connection is made within 10 minutes.
• The unit will not automatically connect to a new Bluetooth device when switched on. Please read the next section on how to
connect to your Bluetooth device.
How to Use
Charging
1. Connect the charging port with any USB charging adapter or active computer USB port.
2. Charging will start automatically with the charging indicator turning red.
3. The speaker is fully charged when the charging indicator turns off.
Pairing
1. Turn on the speaker by pressing and holding the Power Button for 2 seconds.
2. Once the speaker is on, it will go into pairing mode automatically and the Bluetooth indicator will ash red and blue alternately.
3. Activate the Bluetooth function on your device and search for nearby Bluetooth connections.
For iOS: Settings > General > Bluetooth > On
For Android: Settings > Bluetooth > On > Scan for devices
4. Select "TaoTronics Rock" from the search results and tap to connect.
5. The Bluetooth indicator will turn solid blue and there will be a voice prompt to indicate a successful connection.
Note:
• Please make sure there are no other open Bluetooth devices within range, and that the speaker is within 3 feet of your device.
05/06